View source for User:Eric G. Huizinga/Introdution-to Protein-Structure

<StructureSection load='1a3n_au' size='350' side='right' caption='Structure of Hemoglobin (PDB entry [[1a3n]])' scene='' pspeed='8'>
This tutorial illustrates some basic properties of protein structure and useful commands in Jmol and Proteopedia.  Clicking the green links changes the view in the structure box to illustrate the principle described by the text.  If the structure box has a puzzle piece in it, please make sure you have the latest version of [[Java]] installed and follow the directions to allow Proteopedia to run.  To identify a particular atom, toggle off any rotation and hold the mouse button over the atom of interest. This indicates the amino acid residue, the position in the chain, which chain, what atom it is (CA means the alpha carbon), and the overall number of the atom.

== Levels of Protein Structure ==
Proteins are condensation polymers of amino acids.  The <scene name='57/575866/Primary_sequence/3'>primary structure</scene> is the amino acid sequence, from the N terminus to the C terminus of the protein.  The <scene name='57/575866/Secondary_sequence/1'>secondary structure</scene> is the local structure over short distances.  This level of structure is stabilized by <scene name='57/575866/H_bond_a_helix/3'>hydrogen bonds</scene> along the <scene name='57/575866/Backbone/2'>backbone</scene>.  These secondary structures <scene name='57/575866/Global_secondary_structures/1'>pack together</scene> to form the overall form of the entire peptide chain, called the <scene name='57/575866/Tertiary/1'>tertiary structure</scene>.  Some proteins, such as the displayed hemoglobin molecule, have more than one polypeptide chain that associate to form the functional unit of the protein; this is called <scene name='57/575866/Tertiary/2'>quaternary structure</scene>.
'''Questions based upon these scenes:'''

Quest #1) What is the primary sequence shown in the first link? (Hint:  which end of the peptide is the N terminus?)

Quest #2) Is the secondary structure shown an alpha helix or beta sheet?

Quest #3) The fifth C=O of the backbone is hydrogen bonded to which N(-H) (use i +/- # to represent the number)?

Quest #4) What atom does this program NOT show?

Quest #5) What color is used to represent alpha helices?

Quest #6) How many alpha helices are present in the single peptide chain shown?

Quest #7) How many polypeptide chains make up the quaternary structure?


== Ways of representing protein structure ==
Protein structures can be displayed in many different ways.  In <scene name='57/575866/Spacefill_segment/1'>spacefilling</scene> models, all of the non-hydrogen atoms are shown as spheres with their van der Waals radii.  In the <scene name='57/575866/Ball_and_stick_segment/1'>ball and stick</scene> model, the atoms are shown as smaller balls, connected by sticks; this is further simplified in the <scene name='57/575866/Stick_segment/1'>stick</scene> model, which only shows the bonds between atoms.  <scene name='57/575866/Backbone/2'>Backbone</scene> shows only the N-Calpha-C=O repeating unit; the <scene name='57/575866/Cartoon/4'>cartoon</scene> representation shows the secondary structures. 

'''Questions based upon these scenes:'''
Quest #8) Which of these representations would be best for showing...

--Quest #8a) the secondary structures present in a molecule?

--Quest #8b) Channels, holes, or pockets in a protein?

--Quest #8c) Residues in the active site of an enzyme?

'''Explain your answers'''.

== Secondary Structures ==
In this section, you will both learn about secondary structure properties and manipulating structures in Jmol.  We will begin with some basic manipulation strategies so that you can analyze secondary structures.  Try the following manipulations with the mouse:

--Quest #9a) Click and move the mouse to the right, the left, up, and down; what happens to the molecule?

--Quest #9b) Hold the shift button while you try the same manipulations.  What does each do?

Clicking the right mouse button in the structure box brings up an extensive menu. This exercise will use commands in the style, color,zoom, measurements, and set picking categories.

We will begin with the <scene name='57/575866/Cartoon/4'>cartoon</scene> structure of an alpha helix from hemoglobin.  From this view, can you determine:
--Quest #10a) The number of amino acids per turn?

--Quest #10b) The position of the side chains?

Hold the mouse over each end of the alpha helix.  A yellow box should appear, with [VAL]17:A:CA:#120.  This indicates the amino acid residue, the position in the chain, which chain, what atom it is (CA means the alpha carbon), and the overall number of the atom.  If there are two identical chains, one of the chains may be numbered slightly differently (like adding 200 to each residue number) to distinguish the residues.
--Quest #11) What is the amino acid range (i.e. from first AA to last AA number) of this alpha helix?

Rotate the helix so that you are looking down the helix.  
Quest #12) What does the middle of the helix look like?
Right click on the mouse, choose style, then scheme, then CPK spacefill. 

Quest #13) What does the middle of the helix look like?  
Quest #14) Which view is more representative of the true structure of the molecule?

Let's try changing to another view.  Right click on the mouse, choose style, then scheme, then ball and stick.  Based upon what you know about peptide composition or by holding the mouse over the atoms determine the color scheme:
Quest #15a) red = 

Quest #15b) black = 

Quest #15c) blue = 

Notice that hydrogens are not shown on this model.  Xray crystallography is not able to resolve hydrogens, so they are omitted from the images.  This also simplifies the data set, as there are many fewer atoms to position.

Jmol can be used to make measurements of various properties of the alpha helix, such as the dihedral angle.  <scene name='57/575866/No_sidechains/1'>This structure</scene> has the side chains removed (though the alpha carbons show where the side chain would be).  Right click in the structure box.  In the Measurements menu, select "double click begins and ends measurements".  Double click on one of the nitrogens, then click once on the following atoms in order:  the attached Calpha, carbonyl C, and N.  Record this dihedral angle (a psi angle) in a table, recording the number of the Calpha.  Repeat, starting at the N you ended on.  Notice each click gives a different property:  the first is the bond length, the second is the bond angle, and the third is the dihedral (torsional) angle.  You may need to rotate around the helix to see the atoms you want to measure; repeat for four psi angles. After you have completed it for the psi angles, repeat for the phi angles by clicking on the carbonyl C, Calpha, N and carbonyl C.  If you are having problems making the measurements, here is one with the <scene name='57/575866/No_sidechains/2'>psi angles</scene> and one with the <scene name='57/575866/Phi_angles/1'>phi angles</scene>.  

Quest #16a) What is the average phi angle in this alpha helix?  

Quest #16b) What is the range of values?

Quest #17a) What is the average psi angle in this alpha helix?  

Quest #17b) What is the range?

Since hemoglobin doesn't have any beta sheets, we will switch to another protein:  <scene name='57/575866/1cyo_rainbow/1'>cytochrome B5</scene>, PDB code 1CYO. 

Quest #18) Which rendering (spacefill, ball and stick, etc) is presented in this scene?  

The coloring in this view is a N-->C rainbow, with the N terminus being blue and the C terminus red.

Quest #19) Describe the relative positioning of the alpha helices and beta sheets, i.e. are all the alpha helices clustered with the beta sheets in another portion of the sequence, or are they interspersed?

Next, we will look at two of the <scene name='57/575866/1cyo_20_32_transparent/1'>beta strands</scene>. The side chains have been faded out to make the backbone more obvious.

Quest #20) Are these two strands are parallel or antiparallel?

Quest #21) Where are the side chains positioned, relative to the main direction of the strand?

Quest #22) Like before, measure four <scene name='57/575866/1cyo_20_32_psi/1'>psi</scene> and four <scene name='57/575866/1cyo_20_32_phi/1'>phi</scene> angles.   '''Record these values in a table.'''

Quest #23a) What is the average psi angle?  What is the range of values?

Quest #23b) What is the average phi angle?  What is the range of values?

Quest #24) Which has more variability in the dihedral angles, an alpha helix or a beta sheet?

Quest #25) The overall dihedral angles in a protein can be displayed in a <scene name='57/575866/Ramachandran/1'>Ramachandran plot</scene>, which graphs the interrelationship between phi and psi angles.  Pink dots are angles found in alpha helices; yellow dots are found in beta sheets, and white dots are found in other regions (either disordered or turns).  Mouse over the white dots on the right sides; '''what  amino acids tend to have atypical phi and psi angles?'''

===Turns and loops===
Secondary structures are often connected by turns and loops, such as:<UL>
<LI>'''<scene name='57/575866/Secondary_structure_betaturn/1'>Beta Turns</scene>''' - originally defined by the one hydrogen bond common to all (an i, i+3 hydrogen bond) but some modern descriptions do not require a hydrogen bond. 
<LI>'''Alpha turns''' - the simplest of all motifs and is characterized by one (i, i+4) hydrogen bond. It is found as part of the hydrogen bonding network of alpha helices as well as occurring on its own.
<LI>'''<scene name='57/575866/Secondary_structure_paperclip/2'>Paperclip/Schellman Motifs</scene>''' - a common motif found at the C-termini of alpha helices which is essentially a reverse turn that breaks the alpha helix out of its cycle. It is characterized by the presence of a left handed residue and two hydrogen bonds: an i, i+3 bond and an i, i+5 bond. 
 
</UL>


==Motifs In Proteins==
A motif is a super-secondary structure; it describes a set of secondary structures that plays a functional or structural role in a protein.  The term is also used to describe a conserved amino acid sequence that characterizes a biochemical function.  

One of the most common and widely distributed motifs is the [[Rossmann fold]] that appears in dinucleotide binding proteins.

Another example is the <scene name='57/575866/Zinc_finger_highlight/1'>zinc finger motif</scene> that is readily identified by the following consensus sequence pattern (where "X" represents ''any'' amino acid):<br/>

'''Cys''' - X<sub>(2-4)</sub> - '''Cys''' - X<sub>(3)</sub> - Phe - X<sub>(5)</sub> - Leu - X<sub>(2)</sub> - '''His''' - X<sub>(3)</sub> - '''His''' 

The example structure shown is that of Zif268 protein-DNA complex from Mus musculus (PDB entry 1AAY). In this example (a C2H2 class zinc finger) the conserved <scene name='57/575866/Zinc_finger_cysteine/1'>cysteine</scene> and <scene name='57/575866/Zinc_finger_histidine/1'>histidine</scene> residues form ligands to a <scene name='57/575866/Zinc_finger_zn/1'>zinc ion</scene> whose coordination is essential to stabilise the tertiary fold of the protein. The fold is important because it helps orientate the <scene name='57/575866/Zinc_finger_recognition/1'>recognition helices</scene> to bind to the <scene name='57/575866/Zinc_finger_major_groove/1'>major groove of the DNA</scene>. 
{{Clear}}

==Domain==
A domain is an independently folded region of a protein that has a particular function.  In contrast to motifs, domains can exist as separate, functional proteins.  Often domains of proteins have different functions.  For example, [[glyceraldehyde-3-phosphate dehydrogenase]] has <scene name='57/575866/G3pd_domains/1'>two domains</scene>:  a NAD+ binding domain and a glyceraldehyde-3-phosphate binding domain.  The NAD binding domain is found in many proteins that bind NAD+, even though the reactions they catalyze are very different.

==Tertiary Structure==

The tertiary structure of a protein is the overall folding of a single polypeptide chain.  While we are still understanding the folding process, it is obvious that part of the driving force is the sequestering of hydrophobic residues to the middle of the protein, while polar residues are found on the surface.  In <scene name='57/575866/1cyo_hydrophobic/2'>this representation</scene>, the hydrophilic residues are purple, while the hydrophobic ones are grey.  While some hydrophobic residues are on the surface, they do not dominate the structure.  Disulfide bonds can also help stabilize the tertiary structure.

==Quaternary structure==
The <scene name='57/575866/Tertiary/2'>quaternary structure</scene> of proteins is formed when polypeptide chains associate with one another to form a functional unit.  This allows for additional regulatory strategies.  Hemoglobin is the classic example of a quaternary protein structure, and you can explore more on the [[Hemoglobin]] page.  

</StructureSection>

==See Also==
*[[Four levels of protein structure]] -- [[Four levels of protein structure (Spanish)|Los cuatro niveles estructurales de las proteínas]]

=='''Content Donators'''==
Created with content from [[Structural Templates]] written by [[User:Alexander Berchansky|Alexander Berchansky]], [[User:James D Watson|James D Watson]], [[User:Eran Hodis|Eran Hodis]]